Seastar Hydraulic Steering System Bleed Kit Fill Kit Bridge Tube + Hose

Used to refill the boat's steering fluid system. Advantages 1. Used to refill the boat's steering fluid system. 2. Standard Seastar connection between helm and bottle - do not puncture the bottle 3. Custom bridge hose connects the bleed ports on the steering cylinder. Installation instructions: 1. Attach the bottle to the helm reservoir (do not puncture the bottle) (do not let the bottle run dry) 2. Connect the bridge hose to the bleed nipples on the steering cylinder and loosen/open the fittings. 3. Use the helm to pump fluid through the system by turning the wheel in one direction. Air bubbles will be forced to the reservoir at the helm. 4. Manually crank the outboard through full rotation to release trapped air and confirm good bleeding. 5. Note: If you point the bleed nipples upwards while pumping fluid with the helm, air will escape from the cylinder. 6. Repeat 3-4 as needed until no air is visible in the bridge hose. 7. Tighten the bleed nipples before removing the bridge hose. Package includes: 1 set x Boat Bleed Kit Fill Kit