Seastar Hydraulic Steering System Bleed Kit Fill Kit Bridge Tube + Hose

Used to refill your boat's steering fluid system. Advantages 1. Used to refill your boat's steering fluid system. 2. Standard Seastar helm to bottle connection - do not puncture bottle 3. Custom bridge tube connects bleed ports on steering cylinder. Installation Instructions: 1. Attach bottle to helm reservoir (do not puncture bottle) (do not allow bottle to run empty) 2. Connect bridge tube to bleed fittings on steering cylinder and loosen/open fittings. 3. Use helm to pump fluid through system by turning wheel in one direction. Air bubbles will be forced to reservoir at helm. 4. Manually turn outboard engine through full articulation to relieve trapped air and confirm good bleeding. 5. Note: Pointing bleed fittings upwards while pumping fluid with helm will allow air to flow out of cylinder. 6. Repeat 3-4 as needed until no air is visible in bridge tube. 7. Tighten bleed fittings before removing bridge tube. Package Includes: 1 set x Boat Bleed Kit Fill Kit