Hoppa till innehållet

Tech-Protect

Tech-Protect Glass Fit+ 2-pack Tempered Glass for Samsung Galaxy S25 Edge - Clear

178 krhos Proshop · exkl. frakt

Dubbelkollat idag

Jämför 1 butik

Priser från butikernas flöden kan ha ändrats: det är priset hos butiken som gäller, så kontrollera det innan du handlar.

Prishistorik

Köp nu eller vänta?

Pris idag

178 kr

200150100
snitt 172 kr6 okt.Idag
6 oktober 2026
158 kr
Lägst hos Proshop
Lägst
156 kr
Snitt
172 kr
Högst
178 kr
Lägsta pris per dag
2026-10-06158 kr · Lägst hos Proshop
2026-10-08178 kr · Lägst hos Proshop
2026-10-13156 kr · Lägst hos Proshop
2026-10-15178 kr · Lägst hos Proshop

Om produkten

Tech-Protect Glass Fit+ 2-pack Tempered Glass for Samsung Galaxy S25 Edge - Clear

Läs mer

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm. The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use. The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean. * The glass is compatible with most cases available on the market. ** Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen! This is a natural situation and depends on the milling of the screen in a given piece. INSTALLATION INSTRUCTIONS: 1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine. 3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device. 4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.