
Tech-Protect Glass Fit+ 2-pack Tempered Glass for Samsung Galaxy TAB S8 ULTRA / S9 ULTRA / S10 ULTRA / S11 ULTRA 14.6 - Clear
238 kr243 kr−2% senaste veckanhos Proshop · exkl. frakt
Jämfört med det lägsta pris vi sett de 30 dagarna före sänkningen.
Dubbelkollat idag
Jämför 2 butiker
- Proshop, 238 kr plus 49 kr frakt. Till butik (öppnas i ny flik)
I lagerFrakt 49 krDubbelkollad 22:48
238 kr
Lägst
- CS MEGASTORE, 243 kr plus 49 kr frakt. Till butik (öppnas i ny flik)
Slut i lagerFrakt 49 krDubbelkollad 22:38
243 kr
Priser från butikernas flöden kan ha ändrats: det är priset hos butiken som gäller, så kontrollera det innan du handlar.
Prishistorik
Köp nu eller vänta?
Pris idag
238 kr
- Lägst
- 238 kr
- Snitt
- 257 kr
- Högst
- 267 kr
| 2026-10-06 | 264 kr · Lägst hos Proshop |
|---|---|
| 2026-10-12 | 267 kr · Lägst hos Proshop |
| 2026-10-15 | 238 kr · Lägst hos Proshop |
Om produkten
Tech-Protect Glass Fit+ 2-pack Tempered Glass for Samsung Galaxy TAB S8 ULTRA / S9 ULTRA / S10 ULTRA / S11 ULTRA 14.6 - Clear
Läs merLäs mindre
Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm. The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use. The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean. * Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece. INSTALLATION INSTRUCTIONS: 1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine. 3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device. 4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.